Service 02
Edges sealed on PUR.
Matching ABS tape bonded with PUR glue, trimmed, scraped and buffed. The joint disappears and stays sealed against steam and water.
- 0.4–2 mm
- edge thickness
- PUR
- waterproof glue
- Zero
- visible glue line
- 30 mm
- shortest edged side
What you can order
- 1 mm ABSmatched to the board decor, square or radius finish
- 2 mm ABSfor doors and exposed edges, radius finish
- 0.4 mm preparation tapeon MDF that will be sprayed
- 0.6 mm wood veneerfor veneered boards
- Any mix per panelchoose each long and short edge on the cut list
Why PUR
PUR glue cures into a waterproof bond that doesn't soften with heat. It is the right glue for kitchens, bathrooms and anything near a kettle or a dishwasher.
Choosing edges on the cut list
L1 and L2 are the two long edges, W1 and W2 the two short ones. Write the edge thickness in each column you want edged (1, 2, 0.4 or 0.6) and leave the others empty.
Small panels
Very narrow panels (under 65 mm) and very short edges (under 85 mm) are edged by hand-fed passes. They carry a small extra charge per edge, shown on the quote.
Questions
Is the tape matched to the board?
Yes. We pick the matching tape for each decor. If there isn't one, we call you before cutting.
Is there a minimum on edging?
Some tapes are sold in a minimum length (10 m for 2 mm ABS). The quote shows it when it applies.
Other services
Board cutting
Send the panel sizes and we cut them from full sheets on a HOMAG beam saw, optimised so you pay for as little waste as possible.
CNC machining
Hinge bores, shelf-pin holes, grooves, radiused corners, routed patterns and fully shaped panels, straight from your drawing.
Spray finishing
MDF doors, fronts and panels primed, clear lacquered or colour matched to any RAL or NCS code, in a dust-free booth.
Have a cut list ready?
Upload it and get the price with a cutting plan for every board within minutes.