Service 03
Drilled, routed, shaped.
Hinge bores, shelf-pin holes, grooves, radiused corners, routed patterns and fully shaped panels, straight from your drawing.
- 35 mm
- hinge cups
- 3 axis
- nesting router
- DXF / DWG
- drawings accepted
- 5 mm
- shelf-pin holes
What you can order
- Hinge drillingBlum screw-on and press-in, 35 mm cups
- Shelf-pin holes5 mm, in rows or groups
- Groovesfor drawer bottoms and back panels, 4 to 50 mm wide
- J-handles and finger pullsrouted into door edges
- Shaped panelscurves, cut-outs and decorative patterns
Sending a drawing
A DXF or DWG with one layer per tool depth is ideal. A dimensioned sketch or a photo of a hand drawing works too: we draw it and send it back for you to approve before cutting.
Machining from the cut list
For standard hinge drilling and shelf-pin holes you don't need a drawing. Tell us the hinge type and positions in the customer note column, or call and we'll set it up with you.
Questions
Can you machine my own design?
Yes. Send the drawing with your cut list and we quote the machining with the boards.
Is CNC work in the online quote?
Not yet. Upload the cut list for the boards and edging, then email the drawing quoting your HA reference.
Other services
Board cutting
Send the panel sizes and we cut them from full sheets on a HOMAG beam saw, optimised so you pay for as little waste as possible.
Panel edgebanding
Matching ABS tape bonded with PUR glue, trimmed, scraped and buffed. The joint disappears and stays sealed against steam and water.
Spray finishing
MDF doors, fronts and panels primed, clear lacquered or colour matched to any RAL or NCS code, in a dust-free booth.
Have a cut list ready?
Upload it and get the price with a cutting plan for every board within minutes.